| Modes |
Transverse (TEM00)
or Low Order Multimode |
| Cut Kerf Width |
|
0.0008" - 0.006" (20
- 152 microns) |
| Travel |
|
X: 200mm (servo controlled);
Y: 10mm (manual) |
| Working Feedrate |
0.05 - 1.6 in/sec depending on geometric complexity |
| Accuracy |
0.0001 in/in (2.54
microns / 25.4mm) |
| Resolution |
0.00001in (0.254 microns) |
| Example |
On 0.060° (1.524mm)
OD tubing this yields a resolution of 0.0000037in (0.094
microns) with an accuracy of 0.000015in (0.381 microns) |
| Tube Capacity |
|
Tube Capacity:
OD: 0.010" - 0.400" (0.254 micron - 10.15 micron)
Length: 40" (100cm) standard, up to 72" (180cm) option |
| Footprint |
Workstation:
72" x 30" (183cm x 76cm)
Console: 31" x 22" (79cm x 56cm)
Power Supply: 36" x 24" (92cm x 61cm) |
| Features |
Class I safety
interlocked laser enclosure, Class IV available
Vibration isolated laser and motion system
Programmable automated tube feed
Video system and monitor |
| Power |
|
Workstation:
208/220 VAC, 50/60 Hz, 40 amps
Console: 120 VAC, 50/60 hz, 15 amps |
| Water |
20 liters/min at 25psig,
20°C |
